Distillation Labware
Glassware and replacement parts designed to carry out distillations in laboratory settings; includes condensers, distillation heads, receivers, etc. Products are available for various scales and for specialty distillations.
Distillation is a process used widely in the laboratory or in wider working environments for separating or purifying liquids or liquid mixtures based on the different boiling points of individual components.
Distillation Applications:
• Separation and purification of miscible liquid mixtures in organic chemistry
• Drying of solid residues and/or solvent removal
• Fractional distillation of liquids from polymers and petroleum products
• Removal of particulates or other solid contaminants
• As part of a water purification system for production of distilled water for laboratory use
• Specialist steam distillation-based applications such as Kjeldahl analysis of nitrogen and proteins in food, beverage, or environmental samples
What Types of Distillation Equipment Are Available?
Conventional distillation apparatus, typically comprising individual, jointed borosilicate glassware components assembled by the user (depending upon the application), using appropriate clamps, stands, and supports. Most conventional distillation assemblies combine a round-bottomed distilling flask to contain and heat the liquid(s) that require purification, fitted with a stoppered or jointed neck to which is attached a downward-sloping, inclined side-arm for connection to a condensing unit to cool the heated vapors back down to their liquid state. Heating mantles are the preferred heat source for improved temperature control. These conventional distillation units are also available supplied complete and ready-assembled for added convenience and ease of use.
Specialized automated distillation equipment, notably units designed for the determination of volatile acidity and alcoholic strength by volume in wines, musts, and alcoholic beverages, and units designed for Kjeldahl nitrogen or protein determinations.
Ace Glass, Inc. Receiver, moisture test, 10mL, 29/42
10mL moisture test receiver with 29/42 standard taper joint. Suitable for ASTM D 95 and E 123. Subdivided 0.1mL to 2.0mL, and 0.2mL above 2.0mL.
Chemglass Life Sciences Vacuum Trap Body Only, 34/45
Vacuum Trap Body Only, 34/45. Replacement part for CG451404.
Chemglass Life Sciences Reaction Vessel Lid, 4-Neck, 29/42 Center Neck, 3-24/40 Side Necks, 100mm Schott Flange
Reaction Vessel Lid, 4-Neck, 29/42 Center Neck, 3-24/40 Side Necks, 100mm Schott Flange. Four neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring. Note: Four neck lids are available with joint sizes and configurations other than those listed. Please call for details.
Chemglass Life Sciences Vacuum Trap, 1000mL Capacity, Fits 4300mL Dewar Flask, 400mm OAH x 130mm Width, Complete
Vacuum Trap, 1000mL Capacity, Fits 4300mL Dewar Flask, 400mm OAH x 130mm Width, Complete. Similar to CG-4529, but having a 40mm o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum-tight grease-free seal and permits the trap body to be easily disconnected from the stopper for cleaning. Complete trap is supplied with a stopper, trap body and CG-150-09 clamp.
Chemglass Life Sciences Valve, Chem-Vac, Hi-Vac, 180°, 0-8mm, Viton O-Ring
Valve, Chem-Vac, Hi-Vac, 180¿, 0-8mm, Viton O-Ring. CHEM-VAC valve with two sidearms sealed to the barrel at a 180¿ angle to one another and on the same plane. Valve has TFE plug with three o-rings, the tip o-ring making the primary seal on the precision formed tapered seat. O-rings on the non-rotating shaft form an excellent dynamic seal between the TFE plug and glass barrel. See CG-935 for replacement plug, CG-537 for o-ring replacement kit, and CG-904 for glass portion only.
Bellco Glass, Inc. Stainless Steel Condenser Large Flange - Omni Vessels
Probe adapters & compression fittings. Bellco compression fittings are designed using our standard 45 mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow pH and do monitoring via insertion of these probes into the sidearms of vessels. Bellco probe adapters are designed to allow introduction of threaded probes into vessels through 200 mm stainless steel headplate or a 45 mm vertical sidearm. Use on the large flange systems - optional accessories. MADE IN THE USA.
Chemglass Life Sciences Reactor Support Frame, 10L-20L, 19" W x 19" D x 66" H, 15.3" Valve Clearance
Reactor Support Frame, 10L-20L, 19" W x 19" D x 66" H, 15.3" Valve Clearance. Features:¿ Oversized Rugged 1" S.S.Pipe (1.315" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. ¿ All S.S.Uprights are Passivated to Inhibit Corrosion. ¿ Improved Support Clamp Auto-Centers Reactor and Lid, Holding it More Securely and Allowing Easier Installation/Removal of Glassware. ¿ Motor Mount for Electric or Air Motors. ¿ Open Air Design Provides Excellent Accessibility to Reactor and Glassware Components. ¿ Lower Support Plate has a ¿V¿ Shaped Opening that Allows an Unobstructed View of the Bottom Valve. ¿ Mobile: Large Swivel Casters with Locking Mechanisms.
Chemglass Life Sciences Valve, 0-4mm, 1-Arm, Glass Only
Valve, 0-4mm, 1-Arm, Glass Only. This style hi-vac valve has a single sidearm seal at a 90 angle to the barrel. This inexpensive configuration allows for the lower portion of the barrel to be sealed directly to the apparatus being constructed, making for more compact, stronger assemblies. Designed with a precision external thread for fine control.
Chemglass Life Sciences Harvest Tube, M10, for 5L Bio Reactors
Harvest Tube, M10, for 5L Bio Reactors. Harvest tubes mount into the outer M10 or M27 thread on the standard head plate. The design has the tapered tip within 2mm of the bottom of the bio reaction vessel to allow complete harvesting of all cells. The 15 Liter size has an M27 thread with 1/2” tubing for quicker harvest. Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
